Product ID:SPECIALTY STEELS
MSDS Date:08/20/1990
FSC:3439
NIIN:00F027495
MSDS Number: BQZQJ

CYTEMP SPECIALTY STEEL DIV

600 MAYER ST
BRIDGEVILLE, PA 15017
US

Emergency Phone: 412-257-5102

Info Phone: 412-257-5102

Cage: 3D407

CYTEMP SPECIALTY STEEL DIV

BRIDGEVILLE, PA 15017 US

Telephone: 412-257-5102

Cage: 3D407

ALUMINUM (POWDER)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)

BORON OXIDE, TRIOXIDE

CAS: 1303-86-2

RTECS: ED7900000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

COBALT

CAS: 7440-48-4

RTECS: GF8750000

OSHA PEL 0.1 MG/M3;AS CO

ACGIH TLV: 0.05 MG/M3;DUST 9293

CHROMIUM METAL, CHROMIUM, CHROME (SUSPECTED A1 HUMAN

CAS: 7440-47-3

RTECS: GB4200000

OSHA PEL 1 MG/CUM (CEILING)

ACGIH TLV: 0.5 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

COPPER (DUST & MIST), BRONZE POWDER

CAS: 7440-50-8

RTECS: GL5325000

OSHA PEL 0.1 MG(CU)/M3 (FUME)

ACGIH TLV: 0.2 MG/M3 (FUME)

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

RED IRON OXIDE/IRON (III) OXIDE/FERRIC OXIDE/YELLOW FERRIC

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

MANGANESE, MN COMPOUNDS

CAS: 7439-96-5

RTECS: OO9275000

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

MOLYBDENUM (SOLUBLE COMPOUND), LEAD MOLYBDATE

CAS: 7439-98-7

RTECS: QA4680000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

NICKEL (SOLUBLE) (SUSPECTED HUMAN CARCINOGEN BY NTP, IARC,

CAS: 7440-02-0

RTECS: QR5950000

OSHA PEL 1 MG/CUM

ACGIH TLV: 0.05 MG/CUM IC

VANADIUM

CAS: 1314-62-1

RTECS: YW1355000

OSHA PEL C,0.5 MG/M3

ACGIH TLV: 0.05 MG/M3RDUST;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TANTALUM

CAS: 7440-25-7

RTECS: WW5505000

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM

TITANIUM DIOXIDE, TIO2

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION/SKIN: EXPOSURE TO FUMES OR
DUSTS GENERATED DURING HEATING, CUTTING, BRAZING OR WELDING MAY
CAUSE ADVERSE HEALTH EFFECTS.
Explanation of Carcinogenicity:NONE

First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING STOPS, GIVE
ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT, GIVE OXYGEN AS
NECESSARY. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Handling and Storage Precautions:DURING WELDING, PRECAUTIONS SHOULD BE
TAKEN FOR AIRBORNE CONTAMINANTS & NOXIOUS GASES THAT MAY ORGINATE
FROM COMPONENTS OF WELDING ROD.
Other Precautions:WHEN HEATED FOR HOT DEFORMATION, PRECAUTIONS SHOULD
BE TAKEN TO PREVENT BURNS.

Respiratory Protection:USE DUST MASK WHEN HANDLING IN POWDER FORM. USE
PROPERLY FITTED NIOSH APPROVED DUST FUME RESPIRATOR DURING WELDING
OR BURNING & WHEN FUMES EXCEED TLV OR OTHER RECOMMENDED LIMITS.
Ventilation:EXHAUST SYSTEM FOR ABRASIVE CUTTING, GRINDING, WELDING &
BURNING
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Appearance and Odor:SOLID W/METALLIC LUSTRE,
ODORLESS-SHEETS/STRIP/BARS/RODS/BILLETS/SHAPES/PROFILE

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:METAL FUMES & CERTAIN NOXIOUS GASES
SUCH AS CO, MAY BE PRODUCED DURING WELDING OR BURNING OPERATIONS

Waste Disposal Methods:IT IS RECOMMENDED ALL SCRAP GENERATED BE
RECLAIMED & SUBSEQUENTLY RECYCLED IN ACCORDANCE W/FEDERAL, STATE, &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.